Connelly Dash Wakesurf Board

€339.00

112 cm children’s board
Colour-coded markers for foot placement
3 fins: grip and control
Tough compression-moulded construction

Size: 44"

Not sure about the size or model? Find my board in 4 questions

Only 1 left, click & collect within 24 h

Delivery €19.90, free from €500

Ref. 62224325

Build your set-up

Everything you need to get on the water, added to your basket in one go. Untick what you already have.

✓Connelly Dash Wakesurf BoardSize: 44"€339.00
Connelly TORQ Surf Rope
Colour for Connelly TORQ Surf Rope
Connelly Wakesurf Board Sock
Model for Connelly Wakesurf Board Sock
Connelly 3.6″ FCS II Wakesurf Fins (Pair)€49.90

2 items: €388.90

Description

The Dash is the children’s wakesurf board: small and soft, with a colour-coded pad that shows where to put your feet.

Who is it for?

For children discovering wakesurfing.

What sets it apart

Its three fins and crisp rails give it grip and control; compression-moulded around an EPS core, it is tough.

Other wakesurf boards

Ride: beginner, 157 cm
Ride with rope: beginner, with its rope
Spark: beginner, school use
Bentley: hybrid, Thermo Shell

What else you need

A short, thick surf rope, such as the Connelly TORQ Surf Rope.
A board sock to protect it.
A vest or buoyancy aid of at least 50 N.

The right boat

Wakesurfing is only done behind an inboard boat, whose propeller sits under the hull: never behind an outboard or a sterndrive. Ballast and a wake shaper build the long wave you need to surf, at around 16 to 19 km/h.

Technology

The Connelly profile

Ability

Air

Carve

Which board style?

Surf

Cruise

Hybrid

Skim

The Connelly selection chart: the style of each board, and its ability level, from beginner (left) to expert (right).

On this model
Skim
The board relies more on its rails than its fins. Loose and skate-inspired: spins, ollies and shove-its are far easier than on a thick board with big fins.

Compare with the others: Surf, Cruise, Hybrid

Surf
A range of rail shapes, outlines and fins, for different styles and abilities. There is more than one way to surf a wave: try them all.
Cruise
For getting on the water and finding your flow. A thicker profile and softer rails than a hybrid.
Hybrid
A thin profile, fairly sharp rails and a deep surf-style fin: a lively, responsive board that can also draw big carves.

Fin set-up

On this model
Skate
A through-bolted set-up, reliable, simple and customisable: three fins for stability, without the centre fin for a twin feel, without the side fins for a skim set-up.

Compare with the others: Quad, Tri, Twin, Skim

Quad
The speed set-up: two front fins and two smaller ones at the back, all with flat foils. Water flows straight through without resistance, and the curved face gives lift and hold in the wave.
Tri
Probably the most common set-up: the large centre fin holds the line, the two flat-foiled side fins give speed and hold in the wave.
Twin
With no centre fin, less resistance in the middle of the board: more speed, a board that releases easily in a slash and still holds in a bottom turn.
Skim
For playing fast and loose: the board releases very easily, and spins and ollies come without effort.

Construction

On this model
Compression
Moulded under pressure, the board is thin, stiff and strong; beginners and skim riders benefit from its sharp rail. From top to bottom: EVA pad, top graphics, 2 layers of fibreglass, EPS or PU core, 2 layers of fibreglass, base graphics.

Compare with the others: Skelecore, Epoxy, Thermo Shell

Skelecore
A core shaping technique that reduces its mass: the fibres react faster and more naturally. From top to bottom: EVA pad or Ghost grip, top graphics, 2 layers of fibreglass, Skelecore EPS core, full-length wood stringer, 2 layers of fibreglass, base graphics.
Epoxy
The construction surf shapers have always used: a very light, buoyant and responsive board that allows almost any shape. From top to bottom: EVA pad or Ghost grip, top graphics, 2 layers of fibreglass, EPS core, full-length wood stringer, 2 layers of fibreglass, base graphics.
Thermo Shell
The strength of a compression-moulded board and the shaping freedom of an epoxy board: strong, light and made to send it. From top to bottom: EVA pad, Thermo Shell top, 1 layer of fibreglass, EPS core, 1 layer of fibreglass, Thermo Shell base.